16 Zone Speaker Selector RH2813AM


The RH AUDIO 16 zone speaker selector switch RH2813AM has 4 channel inputs (A1,A2,A3,A4) of amplified signal for BGM,with 4 channel inputs (B1,B2,B3,B4) of amplified signal for paging,and 16 individual relay switches,allows the user to distribute an amplified speaker signal up to 16 listening zones.

Paging signal from the remote microphone console RH2816RT enjoys auto-muting facilitates announcements overriding the BGM signal with a quick return to regular operation at any time once the paging stops.

The 25-pin alarm input bus is ready to receive the EMC. Signal from its counterpart 10 zone paging selector RH2816PT, and this input has top priority over paging and BGM signal to support system to output a siren signal or a user-recorded voice alarm or siren once any emergency occurs in the venue.

Built-in monitor speaker with volume control on front panel offers cost effective solution without needing to add separate monitor device in the pa system.


The Features of 16 Zone Smart Speaker Selector
※ Supports 16 zones for BGM and paging.
※ Built-in monitor speaker with volume control on front panel.
※ Separate input for BGM and paging.
※ 70V/100V amplifiered signal input and 16 zone outputs for speakers.
※ Each zone has LED indicator.
※ 25-pin activation bus.
※ Power Handling: maximum 8kW total capacity, maximum 2000W per zone.






The Specification of 16 zone speaker selector

Model
RH2813AM
A1 Input
For 70V/100V amplified BGM signal "CH1-CH4”
A2 Input
For 70V/100V amplified BGM signal“CH5-CH8”
A3 Input
For 70V/100V amplified BGM signal“CH9-CH12”
A4 Input
For 70V/100V amplified BGM signal“CH13-CH16”
B1 Input
For 70V/100V amplified BGM signal“CH1-CH4”
B2 Input
For 70V/100V amplified paging signal“CH5-CH8”
B3 Input
For 70V/100V amplified paging signal“CH9-CH12”
B4 Input
For 70V/100V amplified paging signal CH13-CH16”
Power Handling
Maximum 8kW total capacity, maximum 2000W per zone
Alarm Input
（0V）short cut signal（ALARM IN）
Alarm Output
（0V）short cut signal （ALARM OUT）
Protection
AC FUSE×0.5A
Power Supply
AC 220V ± 10% 50-60Hz
Power Consumption
15-20W
Dimension
89×483×366 mm
Net Weight
6.8Kg
Gross Weight
8.36Kg


Guangzhou Xinghongde Electronics Technology Co.,Ltd.

Tel.: +86 20 39388220
Fax: +86 20 31072811
Email: info@rh-audio.net
Add.: Floor 6, Building J, Kaida Industrial Park, Shixin Road, Xinshuikeng Village, Panyu District, Guangzhou 511400 China. 

Comments

Post a Comment

Popular posts from this blog

Application Principle of Best Column Speakers

Image
  The  best column speakers  is composed of several speakers arranged and connected together. The directional characteristic of the best column speakers is similar to that of a single speaker in the horizontal direction, but greatly improved in the vertical direction. It propagates in wave form in horizontal direction, but has strong directional characteristics in vertical direction, forming a "dish" shaped stereo radiation effect. Install the best column speakers near the stage entrance, point the "sound disc" to the audience, radiate the sound beam to the back of the auditorium with strong sound energy, while the front row weakens each other due to the phase difference caused by the different vertical distance of the speaker, which may be lower than the sound pressure of a single speaker, which makes the distribution of direct sound field tend to be uniform. The horizontal direction of the speaker column should not be "bunching", but should have a larger...
Read more

What is the Two Channel 100V Aplifie？

Image
  Many people misunderstand it as a stereo system because there are two channels, and the stereo mixer is connected to the system before the stereo amplifier and equalizer are used in the whole system. However, what these systems lack is the uniform coverage of the whole auditory area, as well as the minimal difference in sound pressure level and phase response of each channel to the coverage of the auditory area. If the  two channel 100V amplifie  system plays stereo signals without providing smooth overlapping coverage, half of the people in the listening area can only hear half of the audio content, which makes the dual-channel system a bad choice for music amplification. Most listeners hear a completely different mix of music from others. This is too common an oversight in venues for music and entertainment purposes, even in high-quality venues that should have better system design. It is a common misunderstanding for people with working background of tour or live aud...
Read more