16 Zone Paging Selector RH2816PT





The RH AUDIO 16 Zone Paging Selector RH2816PT works together 16 zone speaker selector RH2813AM and 16 zone remote microphone RH-2816RT to select up to 10 paging zones basically for the voice announcement system,can be expanded up to 64 zones.

It has two direct RJ45 microphone inputs, two link outputs for additional microphones, internal chime and priority channel mute, can be operated by selecting the zones using the selector pushbuttons,can also be operated remotely using the 16-zone microphone console,and on the rear there are dipswitches as ID address to be distinguished by paging microphone console.

The multi-pin EMC input bus is ready to connect the alarm signal from the fire detector devices,by adding the alarm interface RH2815E the pa system can output a built-in siren signal or a user-recorded voice alarm or siren once any emergency occurs in the venue.


The Features of 16 Zone Speaker Selector

※ 16-zone paging selection.
※ 16-zone alarm function.
※ Volume control.
※ Built-in chime,with mute function.
※ Each paging zone has LED status indicator.
※ One MIC input 6.5mm jack,four remote MIC inputs, one line input, and one EMC input.
※ 25-pin activation bus, and low level alarm activation.






The Specification of 16 Zone Smart Speaker Selector

Model
RH2816PT
MIC.Input
MIC:600 ohms(Ω) 5mV,unbalanced
Line Input
10k ohms(Ω) 200mV,unbalanced
Line Output
10k ohms(Ω) 0.775V (0dB),unbalanced
Frequency Response
60 Hz ~ 15k Hz (±3dB)
THD
<0.01% at 1kHz
S/N
>70dB
Alarm Activation Input
‘ALARM IN (CH1~CH16)’
Alarm Activation Output
‘SWITCHING OUT (CH1~CH16),
Alarm Activation
Low level(0V)
Level Selection
‘HIGH’/‘LOW’
Muting Function
When EMC inputs,MIC,LINE attenuate 0~30dB
Power Supply
AC220V ± 10% 50-60Hz
Power Consumption
10~15W
Dimension
89(H)×483(W)×350(D)mm
Packing
185(H)×520(W)×435(D)mm
N.W
6.32kg
G.W
7.96kg

Guangzhou Xinghongde Electronics Technology Co.,Ltd.

Tel.: +86 20 39388220
Fax: +86 20 31072811
Email: info@rh-audio.net
Add.: Floor 6, Building J, Kaida Industrial Park, Shixin Road, Xinshuikeng Village, Panyu District, Guangzhou 511400 China. 

Comments

Post a Comment

Popular posts from this blog

16 Zone Speaker Selector RH2813AM

Image
The RH AUDIO   16 zone speaker selector switch RH2813AM has 4 channel inputs (A1,A2,A3,A4) of amplified signal for BGM,with 4 channel inputs (B1,B2,B3,B4) of amplified signal for paging,and 16 individual relay switches,allows the user to distribute an amplified speaker signal up to 16 listening zones. Paging signal from the remote microphone console RH2816RT enjoys auto-muting facilitates announcements overriding the BGM signal with a quick return to regular operation at any time once the paging stops. The 25-pin alarm input bus is ready to receive the EMC. S ignal from its counterpart 10 zone paging selector RH2816PT,   and this input has top priority over paging and BGM signal to support system to output a siren signal or a user-recorded voice alarm or siren once any emergency occurs in the venue. Built-in monitor speaker with volume control on front panel offers cost effective solution without needing to add separate monitor device in the pa system. T...
Read more

Application Principle of Best Column Speakers

Image
  The  best column speakers  is composed of several speakers arranged and connected together. The directional characteristic of the best column speakers is similar to that of a single speaker in the horizontal direction, but greatly improved in the vertical direction. It propagates in wave form in horizontal direction, but has strong directional characteristics in vertical direction, forming a "dish" shaped stereo radiation effect. Install the best column speakers near the stage entrance, point the "sound disc" to the audience, radiate the sound beam to the back of the auditorium with strong sound energy, while the front row weakens each other due to the phase difference caused by the different vertical distance of the speaker, which may be lower than the sound pressure of a single speaker, which makes the distribution of direct sound field tend to be uniform. The horizontal direction of the speaker column should not be "bunching", but should have a larger...
Read more

What is the Two Channel 100V Aplifie？

Image
  Many people misunderstand it as a stereo system because there are two channels, and the stereo mixer is connected to the system before the stereo amplifier and equalizer are used in the whole system. However, what these systems lack is the uniform coverage of the whole auditory area, as well as the minimal difference in sound pressure level and phase response of each channel to the coverage of the auditory area. If the  two channel 100V amplifie  system plays stereo signals without providing smooth overlapping coverage, half of the people in the listening area can only hear half of the audio content, which makes the dual-channel system a bad choice for music amplification. Most listeners hear a completely different mix of music from others. This is too common an oversight in venues for music and entertainment purposes, even in high-quality venues that should have better system design. It is a common misunderstanding for people with working background of tour or live aud...
Read more